Big Bucks Supply Co.
wood6 home copy
Find us on Facebook

For a complete list of the products currently available please click HERE.

FEEDERS

Many of you are asking the question of why I would need a deer feeder. Feeders are not designed to be the end all to whitetail deer feeding. They are designed to provide a consistent and efficient method of supplementing the diet of the whitetail deer. Feeders play a large part in deer management by giving the deer in your area the nutrition and supplements they need at the time of year they need them. Antlers are made up of 46% proteins and fats, therefore a well placed feeder can supply the much needed nutrients to the deer you are managing. Bucks and does need this nutrition in winter and early spring coming off the stresses of winter. Most of the grains have been gone for some time now and the spring green up is still a couple months away. The bucks need to replenish their body weights as well as feed the on coming antler development. Does need the increase in body weight for themselves as well as the need of the upcoming fawn production. In both cases by having these supplemental feeders available at the right time of the year you will have a healthier deer herd.

At Big Bucks Supply Co. we feature feeders made by “Boss Buck “. We believe this is an outstanding product both in quality and value. “Boss Buck” feeders are designed for simplicity in mind. They have a special cone gravity fed system that disperses the feed evenly to a 3 or 4 PVC port openings, depending on the model. All hardware is either galvanized or stainless steel. The hopper is 3/8” thick protected plastic for strength. A loose fitting lid is designed for ventilation but is secure enough to keep out critters and weather. These blinds are also designed for a quick conversion from a PVC port opening to an automatic timer.

350# Capacity Automatic Deer Feeders

350# Capacity Automatic Deer Feeders

3/8" thick wall of HDPE UV Protected plastic

Quick and easy conversion from automatic timer feeding to protein feeding

Hopper weight 30lbs

All galvanized hardware and stainless steel inserts

Lid designed with loose fit to allow proper ventilation

Feeder Legs 106" square - 16 gauge galvanized steel

Approximately holds: 350# Corn / 250# Large Protein Pellets

Converts to Protein/Gravity Feeder

Converts to Hanging Feeder

Battery Included

Solar Panel Sold Separately

Varmint Cage Sold Separately

$419

600# Capacity Automatic Deer Feeders

600# Capacity Automatic Deer Feeders

600# Corn (approximately)

500# Large Protein Pellets (approximately)

"Auto" Feeder Legs 106" 16 GA galvanized steel

Hatch lid is 3" deep

Battery Included

Solar Panel sold separately

All galvanized hardware and stainless steel inserts.

Converts from spin feeder to protein in minutes!!

Varmint Cage Sold Separately

$638

1200# Capacity Automatic Deer Feeders

1200# Capacity Automatic Deer Feeders

Holds 1200# Corn (approximately)

3/8" thick wall of HDPE UV Protected plastic

Height adjustable from 108" to 132"

Hopper 61" tall x 43" wide

Hopper weight 60lbs

Legs 105" 1" - 14 gauge galvanized steel

All galvanized hardware and stainless steel inserts

Lid designed with loose fit to allow proper ventilation

Adjustable hardware components allow you to adjust the height

Battery Included

Solar Panel Sold Separately

Varmint Cage Sold Separately

$839

350# Capacity Gravity/Protein Deer Feeders

350# Capacity Gravity/Protein Deer Feeders

3/8" thick wall of HDPE UV Protected plastic

Quick and easy conversion from protein to automatic timer

Hopper weight 30lbs

All galvanized hardware and stainless steel inserts

Lid designed with loose fit to allow proper ventilation

3-Way system has 5" ports with 4" I.D. openings for a deer's muzzle

Approximately holds: 350# Corn / 250# Large Protein Pellets

Protein Feeder Legs 72" - 1" - 14 gauge galvanized steel

Converts to Hanging Feeder

$299

600# Capacity Gravity/Protein Deer Feeders

600# Capacity Gravity/Protein Deer Feeders

600# Corn (approximately)

500# Large Protein Pellets (approximately)

"Protein" Feeder Legs 84"

Hatch lid is 3" deep

81" from Ground to Lid

42" Feed Height (Ground to Spout)

Inside spread of legs 40"

All galvanized hardware and stainless steel inserts.

Converts from protein to spin feeder in minutes!!

$579

1200# Capacity Gravity/Protein Deer Feeders

1200# Capacity Gravity/Protein Deer Feeders

3/8" thick wall of HDPE UV Protected plastic

Approximately holds: 1200# Corn

Height adjustable from 108” to 132”

Hopper 61” tall x 43 1/2” wide

Hopper weight 60lbs

Legs 105” 1 1/2” - 14 guage galvanized steel

All galvanized hardware and stainless steel inserts

Lid designed with loose fit to allow proper ventilation

4-Way has 5" ports with 4" I.D. openings for a deer's muzzle

Protein 4-way feeding height 40”

$749

ATV Feeder/Spreader

ATV Feeder/Spreader

Attaches easily to your ATV's cargo rack with the easy adjustable brackets. Set it to continuously disperse or use the optional push-button switch to release feed on command. 12-volt spin cast system with lockable latch lid.

Dimensions: 20"T x 18"W x 8"D

$160

ATV Feeder ACCESSORIES: Push Button Switch

ATV Feeder ACCESSORIES:

Push Button Switch - $19.99

ATV Feeder ACCESSORIES: Hitch Receiver

ATV Feeder ACCESSORIES:

Hitch Receiver 2” - $49.99

Here at Big Bucks Supply Co. we are striving to provide quality products at a fair price that will enhance your time afield and your desire to manage and harvest whitetail deer. We are hunters and wildlife enthusiasts just as many of you are so we know the products we like and don’t like. At Big Bucks Supply Co. we want to be a one stop shop for items associated with the whitetail. We want to be that place, not just another link in an ever growing chain of retailers. Products such as blinds built with safety and comfort in mind. Feeders built to hold several hundred pounds of protein supplements, and those very supplements big bucks need to grow strong antlers and maintain healthy body weights. We also want to carry quality seed and seed blends for growing food plots.

To learn more about any of our products, or to make an appointment to visit our Weston MO Showroom, please contact Chris Hiatt at 816.914.5972
or email hiattservices@embarqmail.com.

For an appointment to see the products available in our Weston MO Showroom
contact Chris Hiatt at 816.914.5972 or email hiattservices@embarqmail.com                               .

ccs

©2013 - 2014 BIG BUCKS SUPPLY
Powered by Fancy T. Smith